常见问题

Arbin battery testers are primarily used for electrical performance testing. For mechanical abuse tests such as vibration, crush, or nail penetration, Arbin can be integrated with third-party mechanical/safety test equipment to control charging/discharging, monitor battery response, log synchronized data, and trigger safety actions through auxiliary I/O. For vibration testing, the main machine is usually a […]

Besides the main chassis, Arbin offers a wide range of auxiliary devices to support battery research and testing, including: Auxiliary temperature and humidity measurement Auxiliary second voltage measurement Auxiliary pressure measurement MTCI – for integration with third-party chambers DIDO – Digital Input / Digital Output AIAO – Analog Input / Analog Output EIS – integrated […]

In general, we offer holders for cylindrical, pouch, coin, and prismatic cells. We also provide battery racks for both coin cells and cylindrical cells. Cell type Max current Coin cell 3 A, 5 A Pouch cell 10 A, 60 A, 300 A Cylindrical cell 10 A, 30 A, 60 A, 200 A Prismatic cell 300 […]

Physically, yes. The MZTC can be connected to the cycler through the charge/discharge port. On the MZTC, each mini chamber’s temperature can be controlled directly using the built-in LCD screen. However, we currently do not have a communication protocol that allows the cycler to control the MZTC through software.

No. The MZTC cannot control temperatures below 0°C. The widest temperature range of the MZTC is 10°C to 60°C. However, the actual operating range may be narrower depending on the ambient temperature: The lower limit is 10°C or ambient temperature minus 10°C, whichever is higher. The upper limit is 60°C or ambient temperature plus 40°C, […]

Yes. Arbin offers several products that can help simplify and organize the connection between the battery and the cycler. I. Single Coin Cell Holder With the Phoenix connector, the holder can be plugged directly into the machine’s channel port. II. 8-Channel Universal Coin Cell Battery Holder Tray Part Number: 409716 This tray allows up to […]

一般来说，有几点需要注意：Arbin机器通常的工作环境温度范围是0°C至30°C。因此，请相应地准备空调系统。电力系统必须准备好以匹配机器的输入功率要求。例如，有些机器需要单相电源输入，而有些则需要三相电源……

Arbin 系统将随附预装完整软件套件的计算机。系统硬件设置简单：客户只需使用以太网连接循环器与计算机及辅助设备，即可轻松完成设置。图 1：Arbin 主机 TCP/IP 连接示例 软件已完全安装。[…]

我们优先采用普通银行电汇。我们不接受信用证。 Arbin的标准付款方式为40% – 40% – 20%。第一笔40%需在收到采购订单后立即支付。只有在Arbin的银行账户收到这笔款项后，才会开始生产。交货期从这一时刻起算，而非从收到采购订单时起算。第二笔40%需在[…]

此错误仅在 ArbinAdvSys.cfg 中未选中基于通道的电压钳位选项时发生。这意味着同一 IV 通道板上的所有 IV 通道共享一个电压钳位/电压检查。MITS 软件必须确保同一 IV 板通道上的所有计划共享相同的电压钳位设置；否则，冲突钳位 V[…]

此错误意味着 Aux 通道与 IV 通道失去了通信。通常发生在 Batch/Mapping 文件在未下载到 cycler 的情况下创建或修改时。下载 Batch/Mapping 文件可以解决此问题：如果问题仍未解决，请检查从 Aux 模块到计算机的电缆连接。如果 [...]

电池安装在腔体或手套箱内是可选的，如果客户需要进行测试，Arbin 可以集成。Arbin 提供了一个用于电池测试的 8 区温度箱 (MZTC)，工作温度为 10-60°C，适用于额定电流高达 60A 的电芯。通过腔体和测试仪之间的电缆，连接变得轻而易举。 […]